Vulkan Max

Vulkan Max

Vulkan Max is a highly foaming, non-oxidative disinfectant, based on glutaraldehyde and quaternary ammonium compounds.

Loading...
Only %1 left
Ask your vet about it
Ask your vet about it
Ask your vet about it
Description

Vulkan Max is a strong foaming biocide for professional use, belonging to the closed circuit. It is a non-oxidative disinfectant, based on: glutaraldehyde and quaternary ammonium compounds.

Vulkan Max is used for disinfection of livestock equipment, stables, surfaces and for transport vehicles. Strong disinfecting action: bactericide, levuricide and virucide action.

Biocidal authorisation:

  • PT2: Disinfectants and algicides not intended for direct application to humans or animals. Exclusively registered for general disinfection of hard and non-porous surfaces (industries, communities, greenhouses and shelters, veterinary clinics, ...)
  • PT3: Veterinary hygiene. Exclusively registered for the disinfection of buildings, livestock equipment, animal transport vehicles.
  • PT4: Surfaces in contact with food and feed. Exclusively registered for disinfection of hard, non-porous surfaces in contact with food: storage rooms, equipment and food transport vehicles.
Target organisms:
  • E.coli
  • Staphylococcus aureus
  • Proteus vulgaris
  • Enterococcus hirae
  • Pseudomonas aeruginosa
  • Candida albicans
  • Ecbo virus (only PT3)
Composition: Glutaraldehyde: 13.65%, didecyldimethylammonium chloride: 1.67% and benzyl-C12-16-alkyldimethylammonium chloride: 15.28%

Application dosage:  

  • PT2 (spraying) and PT4 (spraying or immersion) surface disinfection: bactericidal and levuricidal activity (according to EN 13697): dilute 0,4% in drinking water at room temperature, 15 minutes contact time on hard, non-porous surfaces not previously cleaned.
  • PT3 (stable disinfection) application (by spraying or dipping) surface disinfection: bactericidal activity (according to EN 14349), levuricidal activity (according to EN 16438) and virucidal activity (according to EN14675): dilute 0,6% in drinking water at + 10-18°C, 60 minutes contact time on hard, non-porous surfaces that have been cleaned, rinsed and dried before.

Operating instructions:

  • Before disinfection, the surfaces and equipment must be properly cleaned. 
  • Rinse with water. Remove excess water. 
  • Apply by foam gun or IF Applicator. Vulkan Max is a strong foaming disinfectant.
  • Use sufficient water to keep the surfaces moist during the soaking time. Decontaminated surfaces in contact with foodstuffs must be rinsed. 

Approval number: BE-REG-00878

Packaging: 5, 20 and 200 litres.

This product is a biocide, classified in the closed circuit. Instructions for use, storage and transport can be found on the safety data sheet. Use biocides safely. Read the label and product information before use.

Write Your Own Review
You're reviewing:Vulkan Max

WE FOUND OTHER PRODUCTS YOU MIGHT LIKE!

Ask your vet about it
Vulkan Air
Vulkan Air
Ask your vet about it
Prophyl S
Prophyl S