pH and temperature meter digital

The digital pH meter is a portable pH and temperature meter. The pH electrodes have a built-in temperature sensor and also contain an amplifier so that the measurements are not disturbed by noise and electrical interferences. This appliance is extremely suitable for checking drinking water pH and liquid feed.

These meters easily fit into the palm of your hand and the electrode connection at the bottom ensures that the cable of the electrode is not in the way.

Characteristics:

• Titanium electrode
• Water resistant (IP67)
• Multiple levels on the screen
• These meters display the current measurement simultaneously Whiteh the temperature.
• The Hold function holds the measurement on the screen for manual recording.
• 'Field strength': the housing of these water resistant meters is made of ABS plastic and the electrodes are made of titanium.
• Automatic temperature compensation.
• Automatic 1 or 2 point calibration.

Technical specifications:

• Range pH: -2.00 to 16.00 pH
• Temperature: -5.0 to 105.0 °C
• Resolution:
• pH 0.01 pH
• Temperature 0.1 °C
• Accuracy at 20 °C:
• pH ± 0.02
• Temperature ± 0.5 °C to 60 °C, ± 1 °C (outside)
• Temperature compensation pH Automatic -5.0 to 105.0 ° C.
• pH calibration: automatic, 1 or 2 calibration points Whiteh 2 sets of memorized buffers.
• Battery type: 1.5 V AAA (3 pieces).
• Lifespan: approximately 1,200 hours of continuous use.
• Auto-off: after 8 minutes of non-use.
• Dimensions: 152 x 58 x 30 mm.
• Weight: 205 g.